|
Elecro heat pumps are the most efficient
and reliable swimming pool heat pumps available. Built to the highest
possible standards Elecro heat pumps absorb heat from the air and transfer
it to the pool water - making the heating process clean, efficient,
ecological and most of all cost effective.
All Elecro heat pumps feature state of
the art technology and are built using the highest quality components to
ensure ultimate performance and reliability.
Key Features
Titanium Heat Exchanger - Total
protection against corrosion, full-flow no by-pass required. Zero
corrosion defect 10-year guarantee.
Scroll
Compressor - Efficient, reliable and silent.
Whisper Quiet Fan - Low speed, tuned
for maximum airflow and minimum noise.
Largest
Evaporator - Enables higher performance. Epoxy coated for
protection against corrosion.
Digital Control - State of the art,
easily programmable with full diagnostic display
All Elecro heat pumps are fully supported by Elecro
with 3-year parts & labour guarantee.
How Do Swimming Pool Heat Pumps Work?
Step 1 : The evaporator
absorbs heat from the ambient air drawn through the evaporator coil by the
fan (1a). The heat is transferred to the cold refrigerant flowing through
the evaporator coil and the residual cooler air generated by the process is
then discharged out of the heat pump by the fan (1b).
Step 2 : The compressor
then receives the warmed refrigerant and by the compression action, heats
it, elevating substantially the pressure inside the system. The now hot
refrigerant converted to gas is then pumped to the condenser.
Step 3 : The heat from
the hot refrigerant flowing inside the condenser is then transferred to the
pool water, touching the exterior of the condenser coil, when flowing
through the heat exchanger. In the process, the refrigerant temperature
drops and the water temperature increases.
Step 4 : The now warm
refrigerant flows through the pressure control regulator device (capillaries
or expansion valve) greatly reducing the pressure inside the system and
chilling the refrigerant to a cool state again. The refrigerant is then
ready to restart the process and flow into the evaporator coil to collect
the heat again.
Superior Efficiency, Low
Running Costs
A swimming pool heat pump
only requires energy to operate a compressor and a fan motor, requiring
minimum power consumption in the process. Elecro Focus Temp heat pumps
can produce up to 5 times more heat energy than the electrical power it
consumes. This means that for every 1-kW of electricity consumed, the heat
pump can produce up to 5-kW of heat output into the pool water.
Focus
Temp Heat Pump Output / Consumption Comparison
|
Model |
Power Output (kW/BTU) |
Consumption
(kW/hr) |
|
40K |
12-kW
/ (40,000) |
2 |
|
49K |
14-kW / (49,000) |
2.7 |
|
65K |
19-kW / (65,000) |
3.4 |
|
100K |
29-kW / (100,000) |
5.2 |
The above table is based on
ambient air temperature & water temperature @ 22ºC
Technical Specifications
|
Model |
40K BTU |
49K BTU |
65K BTU |
100K BTU |
|
Power Output (kW) |
12-kW |
14-kW |
19-kW |
29-kW |
|
Power Consumption
(kW) |
2.0-kW |
2.7-kW |
3.4-kW |
5.2-kW |
|
COP (Coefficient of
Performance) |
5.9 |
5.3 |
5.6 |
5.6 |
|
Power Supply
Voltage - Phase - Hz |
220/240-1-50 |
220/240-1-50 |
220/240-1-50
or 380/400-3-50 |
220/240-1-50
or 380/400-3-50 |
|
Amperage |
12 |
13 |
18 |
24 |
|
Circuit Breaker |
20 |
30 |
30
15 |
40
15 |
|
Pipe Work
Connections |
1.5" / 2"
or 63mm |
1.5" / 2"
or 63mm |
1.5" / 2"
or 63mm |
1.5" / 2"
or 63mm |
|
Dimensions (cm) |
82 x 82 x 87 |
82 x 82x 87 |
82 x 82x 87 |
82 x 82 x 102 |
|
Noise Levels dBA (3m) |
48-52 |
48-52 |
48-52 |
48-52 |
|
Weight (Kg) |
90 |
90 |
90 |
105 |
| Output
|
BTU
|
|
|
12KW |
40,000 |
£2,800.00 |
 |
|
14KW
|
49,000
|
£3,250.00
|
|
|
19KW
|
65,000
|
£3,500.00
|
|
|
29KW
|
100,000
|
£3,995.00
|
|
|
